mo.blaze tens4 2in1 flash set
for Harley Davidson models
Important notes
mo.blaze tens4 2in1 flash set for Harley Davidson models
motogadget also has dash indicators for Harley-Davidson motorcycles (from 2002) in its product range, the motogadget *mo.blaze Tens4 HD* in a set for mounting on the left and right side. Here for cable clutch equipped Harleys and in the 2in1 turn signal + position light version. Switched off, the small parts are hardly visible on the vehicle. However, thanks to the extremely bright motogadget IntensiLED technology, the *mo.blaze Tens4 HD* are impossible to miss. Two versions are available, as indicators or as a 2-in-1 version with an additional, permanent, white position light. The *mo.blaze Tens4 HD* are attached using the original mirror nut. You can lay the highly flexible connection cable invisibly and connect it to the original indicator cable in the control panel. The indicators are ECE approved and do not need to be registered in the vehicle documents. The high-quality aluminium housing is CNC-milled and black anodised. Available in two versions for cable or hydraulic clutches.
- Aluminium, CNC-milled
- bright motogadget IntensiLED technology
- voltage: 12V
- power consumption: approx. 1 or 2 watts
- lifespan: 50000h
- diameter: 11 mm
- cable length: approx. 20 cm
- weight: approx. 20 g
- mounting: OEM mirror screw
- waterproof - IP69
- vibration-resistant
- set price
2 x motogadget *mo.blaze Tens4 HD* 2in1
QR code for mounting and operating instructions
Manufacturer: Motogadget GmbH | Wollenberger Straße 4 I/J | 13053 Berlin | Germany | +49 3069004100 | shop@motogadget.de | www.motogadget.com
High Class Instruments & Accessories - MADE IN GERMANY
Anyone who is serious about customising cannot fail to appreciate the quality of motogadget products. In no time at all, the Berlin-based manufacturer has achieved virtually cult status with its high-class instruments. The reason is the exceptional functionality of motogadget products, but most importantly their extremely clean design, high-quality materials, top engineering and absolute reliability.
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?