mo.view bar adapter set for
BAR-END MIRROR
Important notes
mo.view bar adapter set for BAR-END MIRROR
The mo.view bar adapter enables you to install any mo.view bar-end mirror without having to move the handlebar controls or shorten the grips. It provides a clamping surface for the bar-end mirror outside of the handlebar tube.
The mo.view adapter is made of billet aluminium, CNC-machined and black anodised. The screw-on cover is concave and has a decorative crown.
The adapter is clamped to the end of the handlebar by tightening the M6 screw located under the cover. This spreads the clamp so that it grips securely.
- Compatible with all 22 mm, 7/8 and 1-inch handlebars with a free inside diameter of 12 mm to 21 mm
- Overall length approx. 45 mm. A minimum free inside tube length of 30 mm is required
- Width of clamping surface for the mirror: 8 mm suitable bar-end mirrors
- Diameter of the clamping surface: 25.4 mm, suitable for mo.view bar-end mirrors
In the box:
2 x mo.view bar adapters, 2 x clamps (for left and right handlebar ends), instructions
Manufacturer: Motogadget GmbH | Wollenberger Straße 4 I/J | 13053 Berlin | Deutschland | +49 3069004100 | shop@motogadget.de | www.motogadget.com
High Class Instruments & Accessories - MADE IN GERMANY
Anyone who is serious about customising cannot fail to appreciate the quality of motogadget products. In no time at all, the Berlin-based manufacturer has achieved virtually cult status with its high-class instruments. The reason is the exceptional functionality of motogadget products, but most importantly their extremely clean design, high-quality materials, top engineering and absolute reliability.
This product is made of high-quality CNC-machined aluminium and will look great on your motorbike.
To ensure that it gives you many years of service, please observe the following care instructions:
1. After installing the product, and each time you wash your motorbike, apply a wax-based care product, e.g. Procycle Polishing Wax, Order no. 10004923 for protection against wind and weather. You may need to repeat the application after an outing in winter weather, rain or salty air (near the coast).
2. Remove any corrosion as soon as possible using a standard aluminium polish (e.g. Autosol Aluminium Polish, Order no. 10004421).
Stainless steel is a collective term for rustproof steel. It is much more resistant to corrosion than non-alloyed steels. Stainless steel does not deteriorate, and is hygienic, UV-resistant, non-corroding, fracture-proof, non-toxic and environmentally friendly. It does not weather and can be recycled in its entirety, even after many years. Technically, the term "stainless steel" refers to corrosion-resistant steel alloys with a wide variety of compositions but always containing a high percentage of chromium (usually a minimum of 10.5%)
.
MAINTENANCE:
Stainless steel should be cleaned regularly like all other materials, especially after exposure to salty air (near the coast), and also at regular intervals.
Water can easily collect in corners, edges and screw connections, resulting in corrosion. So careful cleaning is important, and if necessary screws should be undone in order to clean the parts thoroughly.
Do not leave rusty steel parts against stainless steel to avoid the rust "contamination".
QUALITY MADE IN GERMANY!
By purchasing this item you have chosen a premium-quality product with superior German workmanship. This internationally acknowledged mark of quality means that this product is the result of efficiently coordinated development and production processes, technological expertise, continuous quality controls.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?