Öhlins front spring kit

Öhlins fork springs are the ideal complement to Öhlins rear suspension. They ensure that your motorcycle chassis is optimally balanced! Just like their monoshocks, the fork springs from the famous Swedish suspension manufacturer are tailored to the individual motorcycle model. The result is optimal performance that is noticeably superior to OEM fork springs, which are often too soft.

Modern, high-precision production methods mean that Öhlins fork springs deviate by a maximum of 3% from the calculated spring rate. High-quality materials guarantee maximum stability and long service life with consistent performance. Low abrasion means that the fork oil stays significantly cleaner than with conventional fork springs, thus minimising wear to the forks as a whole.

Öhlins fork springs are linear or progressive, depending on the motorcycle model. Linear fork springs offer uniform resistance over the entire suspension travel, and therefore support uniform damping. Progressive springs are designed to have a different spring rate, and therefore damping behaviour, in different regions of the suspension travel. Progressive fork springs offer advantages for touring bikes which have to carry varying loads. They are also widely used on classic bikes with twin-shocks on the rear swing arm and conventional, non-adjustable telescopic forks. But the same rule applies to both versions: Öhlins fork springs in combination with Öhlins fork oil deliver a considerable increase in performance over the original fork.

It is important for the balance of the motorcycle that the same type of springs (either linear or progressive) are used both front and rear. In order to utilise the performance of the fork springs optimally, the manufacturer recommends filling the forks with Öhlins fork oil according to the recommendation for the particular motorbike model (see table in the Documents section!)

Please note:

• (PROG.): Indicates progressive fork springs. All others are linear.
• 6.5 - 11.0: The number after the product name "ÖHLINS FORK SPRINGS" indicates the spring rate (N/mm) of the particular fork springs. The higher the number the harder the fork springs.
• /LHA: Refer to your owner's manual for the recommended oil and air cushion/oil level.
• /R&T: The manufacturer recommends Öhlins R&T fork oil (Art. no.: 60870350)
• /#5: The manufacturer recommends Öhlins #5 fork oil (Art. no.: 60870351)
• /#10: The manufacturer recommends Öhlins #10 fork oil (Art. no.: 60870352)
• /#20: The manufacturer recommends Öhlins #20 fork oil (Art. no.: 60870353)

Important:
Installing this product requires technical knowledge. If you do not have the relevant qualifications, we strongly recommend having the work done by a reputable motorcycle workshop! A list of ÖHLINS service centres can be found at the following link: https://www.ohlins.eu/de/motorcycle/dealer/