PUIG LED HEADLIGHT
BLACK
Important notes
PUIG LED HEADLIGHT BLACK
Naked bikes, cafe racers, custom motorbikes - all these two-wheeled treasures have a certain retro touch in common, this experience of "free", undisguised motorcycling in its most original and pure form. But the technology behind it is ultra-modern. "Neoretro" is the keyword and this trend is developing all the time. Puig, for example, has developed an LED universal headlight that balances the retro, round shape with the latest lighting technology.
The full size of this LED headlight is 175 mm in width (6.89 inches) and 160.4 mm in height (6.31 inches). The distance between the mounting point and the headlamp is 139.2 mm, which is the same size as the black housing.
Material:
- Housing made of black painted metal
Functions:
- High beam: Watt: 11W / Lumen: 900LM
- Low beam: Watt: 9W / Lumen: 800LM
- Position light: Watt: 4W
Dimensions:
- Width: 175 mm
- Height: 160 mm
Delivery:
1 x Puig universal LED headlight
Mounting material: two screws, two thin washers and two more thick washers. Below you will find the link to the mounting instructions.
Notice:
If your motorbike is equipped with LED position lights as standard, you can activate the high and low beam as before the conversion. This means that when you activate the headlights, the LED light would come on (daytime running light), and when you activate the high beam or low beam, the LED system would go out. If your vehicle only has high and low beams, they will be activated in equal parts, together with the LED groups.
Motorbike windshields and styling parts
Exactly 50 years ago the Puig company was founded not far from Barcelona. With the most modern development and production techniques, high-grade products for the automotive and motorcycle sector are still made on the 8,000 m2 site today. The best racers in the world choose Puig shields. The fairing windshields for production bikes draw directly from the experience and developments in MotoGP racing. The range of products also includes high-quality rear huggers, belly pans and crash bars. Of course, all items are supplied with type approval and installation instructions.
Modern vehicle accessories of different types now frequently carry an "E" approval mark valid throughout Europe. This "E" mark, which is made up of a combination of letters and numbers, is clearly displayed on the product and shows the application tested, the country in which testing was carried out and, where appropriate, the vehicle type to which approval applies. EC type approval for exhaust systems, for example, are always issued for a specific vehicle type, whereas in the case of lighting, they apply to an entire group of vehicles, e.g. motorcycles.
This certification mark is the sole proof of legality stipulated by law, i.e. no written report or entry in the vehicle documents by TÜV (German Technical Inspection Association) is required. However, when it comes to installing accessories, the relevant guidelines of the Road Traffic Licensing Regulations (StvZO) must always be observed.
At at a roadside check or a TÜV vehicle inspection, the registered keeper is only required to show the "E" mark. It is then up to the official in charge whether to check the mark with the Federal Motor Transport Authority (KBA) in Flensburg (or equivalent type approval authority in other countries), which is able to decode all certification marks.
Original parts on newer vehicles that have been given an "E" mark at the factory may only be replaced with accessories that have likewise undergone E-approval. An E-certified mirror may not, for example, by replaced with a mirror that only has TÜV approval under the German vehicle licensing regulations.
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?