REAR BRAKE CYLINDER
11 MM TITANIUM
Important notes
REAR BRAKE CYLINDER 11 MM TITANIUM
If your vehicle is equipped with a brake system from the Italian brand Brembo, only original spare parts will be considered if required. Here, for example, is the Brembo brake master cylinder for the rear. And to ensure that you get exactly the right cylinder for your brakes, you need to carefully check the diameter of the cylinder on your vehicle and order accordingly. Of course, the article numbers and designations on your original part may help you here.
‘Professional knowledge+’ is required for installation, as these are safety-relevant components.
Bear in mind that improper installation and incorrect use can endanger your life and that of others as well as causing damage to the vehicle (brake failure, reduced or excessive braking effect possible!). Particular caution is required for vehicles with ABS (especially BMW). Specialised knowledge and tools are essential here.
- Original spare part, please check the exact diameter of the cylinder on the vehicle before ordering and order accordingly
- The pump diameter is usually engraved at the bottom between the mounting points
- Precision-milled cast aluminium
- Distance between the mounting points: 40mm
- Weight approx. 85 grams
Brembo brake callipers/master cylinders are intended for replacement only. They are not approved or homologated for any other use. Upgrades, conversions and individual modifications to the brake systems are not permitted.
List of compatible motorcycles
More than brakes!
Around 50 years ago, the Italian company started out producing brake discs for cars. Further brake system components such as brake calipers and brake pumps followed. In 1972, Brembo supplied brakes as original equipment for Moto Guzzi for the first time. From 1975, Ferrari Formula 1 cars began using Brembo brake technology. Today Brembo is the OEM for BMW, KTM, Harley-Davidson, Ducati and MV Agusta, among others.Brembo has dominated the motorcycle racing scene for many years now: over 20 titles in both the MotoGP and Superbike World Championship are impressive evidence of the superiority of Brembo's brake technology.And the secrets behind this success story? A passion for racing, the determination to always be the best, lots of meticulous development work and relentlessly high requirements on the quality of materials and workmanship.
Made in Italy
Professional technical expertise is essential to fit this article. We therefore urge you to have it installed by a motorcycle workshop!
To ensure that your objective and truthful report will be really beneficial to all readers, please observe the following rules.
- Please only rate products that you have personally used for their intended purpose.
- Please give reasons for your positive and negative criticisms. Only then will they benefit other customers and allow us to improve the product if necessary.
- Please don’t copy content that has already been published elsewhere. It’s your personal experience which counts.
- Data protection: Please don’t include your own and other people’s addresses, telephone numbers or URLs or even the names of third parties (people as well as companies) in your review.
- In your product review, please don’t make comparisons with third party product ranges. Regardless of whether you judge these positively or negatively, you, or we as operators of this online shop, would be violating competition law.
Fair play: Please follow these rules so that we don’t have to shorten or delete your rating.
Your product rating has been saved. It will be displayed in a few minutes
Do you really want to cancel your entry?